GIN KAI TECHNOLOGY(SHANGHAI) CO., LTD.
EN
EN
Plastic Diaphragm Pump Plastic Diaphragm Pump

1 Inch Polypropylene Diaphragm Pump

ModelGK25 Polypropylene Diaphragm Pump
Max.Working Pressure120psi (0.84Mpa, 8.4bar)
Max.Flow Rate40 gpm (150 Ipm)
Max.Reciprocating Speed276cpm
Max.Suction Height (Dry Sucking)5m
Max.Permitted Grain0.16in.(4mm)
Max.Air Consumption45scfm (22.5L/s)
Air Inlet Size1/2 in.
Air Outlet Size3/4 in.
Fluid Inlet Size1 in.
Fluid Outlet Size1 in.
WeightThread connect: PP 8.5kg, Flange connect PP 9.2kg
Share:

Products Applications

Industries InvolvedApplications
Petrochemical IndustryCrude oil, heavy oil, grease, mud, sludge, etc.
Chemical IndustryAcids, alkali, solvents, suspended solids, decentralized system
Wastewater TreatmentLime milk, Soft Sediments, Sewage, Chemicals, Wastewater
Electronic IndustrySolvents, electroplating fluid, cleaning fluid, sulfuric acid, nitric acid, waste acids, corrosive acids, polishing solutions / liquid
Nuclear Power IndustryPipeline system, nuclear station lubrication system and common island(CI) wastewater treatment


*Please contact our sales service at sales@gk-supply.com for more details about products applications.

Product Advantages

1 inch air operated diaphragm pump is normally use for most industries such as wastewater treatment,electronic industry,chemical industry.

Example,it always use in oil water separation in wastewater treatment process.

It is lightly since smaller and use PP materials.So it can be move easily than others sizes.